UVC Light
Applications
Kill viruses and bacteria in seconds without the use of chemicals. For decades, commercial industries have been using UVC light to sterilize medical laboratories and hospitals.
Applications include laboratories, hospitals, food and beverage processing areas, schools, libraries and
homes. The device is suitable for a variety of specialized uses, e.g.: • Residential and commercial mold remediation (as a supplement to other control strategies) • Food preparation, processing, restaurants, etc. to reduce contamination • DNA laboratories to prevent cross-contamination • Surface decontamination in hospitals, clinics • Day Care Centers, schools, gyms, locker rooms.
Instructions
To use the light:
1.Put on protective gloves and glasses ensuring that one does not expose bare skin or eyes to the UVC light.
**Note: Even though, the aluminum safety shield on the wand prevents direct exposure to the UVC light, you MUST put safety glasses/gloves on when using the wand at all times to ensure your safety. **
2. Plug the wand in an outlet.
3. Flip the switch on the wand wait for approximately 5 minutes
4. Hold the wand by the handle and very slowly move the wand across the contaminated area keeping the light close to the surface as possible
5. Movement of the Wand should result in a minimum exposure time of 10 seconds per pass over the area being exposed and one can repeat the procedure several times to allow additional exposure to the UVC light.